ALL COURSES AVAILABLE IN SPANISH

Active Shooter Class 

Due to an increase in active shooter incidents and the swiftness with which they unfold, we must now prepare ourselves, our co-workers, families and communities. This course will focus on how to be prepared and gain the skills needed to prevent, recognize and increase your ability to survive during an active shooter incident. This course will provide details on what behaviors to look for and who to contact to prevent an active shooter incident. You will also learn how to make educated life-saving decisions regarding which actions to take during an active shooter incident.

COVID-19 Compliance

Learn from the leading experts around infectious disease, healthcare professionals at the forefront of the epidemic, and attorneys that specialize in employer legalities and financial impact. The impact of Coronavirus (COVID-19) on business is inevitable - but preparedness is key to minimizing negative impact to your company and its employees.

Spill Prevention Control & Countermeasures

This course covers the federal requirements for Spill Prevention, Control, and Countermeasure (SPCC) plans and their role in helping prevent oil spills that could reach navigable waters of the United States (or adjoining shorelines). You’ll learn the most updated SPCC regulations. We’ll walk you through how to prepare, review, and design a facility-specific SPCC plan of your own, as well as facility response plans and integrated contingency plans. We’ll also discuss substantial harm criteria, the importance of emergency management at facilities, and reporting requirements.

Industrial Hygiene

Principles of Industrial Hygiene provides an introduction to the field of industrial hygiene and to occupational health in general. The specialist focuses on introducing concepts, terminology, and methodology in the practice of industrial hygiene and identifies resource materials.

Storm Water Management

Our employee training programs are established to reach employees about storm water management, potential sources of contaminants, and Best Management Practices (BMPs). Employee training programs should instill all personnel with a thorough understanding of their Storm Water Pollution Prevention Plan (SWPPP), including BMPs, processes and materials they are working with, safety hazards, practices for preventing discharges, and procedures for responding quickly and properly to toxic and hazardous material incidents.

RCRA

The Resource Conservation and Recovery Act (RCRA), pronounced “Rick-Ra”, is the standard enacted by Congress at the federal level. This program is intended to provide a basic knowledge on the different types of regulated wastes and awareness on proper handling. This course will cover the RCRA regulation, employee responsibilities as well as waste recognition. The best way to deal with hazardous, universal and special wastes is not to produce them in the first place. Where reduction is not possible then proper management is your best way of making sure you have a safe environment both at work and at home.

HAZMAT/DOT Training

GHSE provides hazmat certification training to simplify compliance with the complex US and international hazardous materials/dangerous goods regulations that shippers must know. Our hazmat courses provide certification training required by the US Department of Transportation (DOT), the International Civil Aviation Organization (ICAO) and International Air Transportation (IATA), and the International Maritime Organization (IMO). Get the most effective training, customized to your products, systems, methods and/or procedures. Face-to-face training and the ability to ensure each student understands the regulations. No legalese - class is taught in an understandable format.

Lockout/Tagout 29 CFR 1910.147

This course provides training as required by OSHA’s Control of Hazardous Energy (Lockout/Tagout) Standard (29 CFR 1910.147). Material covered in the course includes a thorough review of the Standard, its applications and limitations and major compliance requirements including training, assistance in identifying responsible staff, and preparation and organization of an equipment inventory. You will also gain valuable information needed for the development, implementation, and upkeep of an effective Lockout/Tagout Program.

Hearing Conservation/General Awareness

This OSHA Hearing Protection training course is designed to provide training for workers that are exposed to noise at or above an 8 hour time weighted average of 85 decibels in their workplace. The OSHA Hearing Protection training program covers the Hearing Protection issues identified by OSHA in the regulation. Successful completion of the program will result in a OSHA Hearing Protection certificate documenting compliance with the OSHA training requirements. Within this course, employees will gain a fundamental awareness of equipment designed for hearing protection, such as earplugs and earmuffs, and how to limit the damage that comes from prolonged noise exposure. Employers will learn what is included in a hearing conservation and monitoring program, especially the utilization of audiometric testing to gather site information.

Exposure Control Plan/Affected Employees

This course covers the development and implementation of Exposure Control Plans (ECP) for healthcare facilities. Course highlights include students developing a template for their facility’s ECP. Upon course completion students will have the ability to take a step-by-step approach in developing an ECP for their healthcare facility while utilizing the OSHA Bloodborne Pathogens Standard as a reference.

CPR/First Aid 29 CFR 1910.1030

The bloodborne pathogen course taught for rescuers in conjunction with CPR or First Aid training is based upon the OSHA Bloodborne Pathogen Standard and is designed to educate bystanders and rescuers in some of the pathogenic exposure risks inherent in first aid contact. The course includes a discussion of the epidemiology and symptoms of bloodborne diseases, an explanation of the modes of transmission, the recognition of tasks that may involve exposure, an explanation of Universal Precautions, Work Practice Controls, Engineering Controls, Administrative Controls, and the use of Personal Protective Equipment. The course will also discuss the employer’s responsibilities, including the availability to the Hepatitis B vaccine.

Confined Spaces 29 CFR 1910.146

This course covers OSHA compliant information about confined spaces, hazardous atmospheres, necessary equipment, and permits. The intent of this course is to provide the learner with information about the hazards and hazard control methods that will permit safe work in enclosed work areas or confined spaces. Learner objectives for this course are to recognize terms commonly associated with confined spaces, distinguish the difference between permit required confined spaces and non-permit required confined spaces, identify hazards associated with confined spaces, recognize signs and symptoms of over exposure, identify equipment needed for confined space entry, specify safe entry procedures for confined spaces, recognize permits posted at points of entry to a confined space and specify their purpose and use, and identify the duties and responsibilities of personnel involved with confined spaces.

Respiratory Protection 29 CFR 1910.134

This program is an overview of the general elements of an effective respiratory protection program to include the methods of selection, use, care, proper fit and medical clearance of respirators in the workplace.

Personal Protective Equipment 29 CFR 1910.132-138

Personal Protective Equipment training is important because the proper use of specialized clothing and work accessories can prevent injuries in the workplace. It is important for employers to be committed to establishing proper safety practices and providing a safe work environment. The goal of this course is to help employers reduce their employee’s exposure to workplace hazards and protect them from serious injury by learning how to properly use Personal Protective Equipment (PPE).

Overhead & Gantry Cranes 29 CFR 1910.179

This course was designed to cover Overhead Crane Safety and Operation. This course will cover OSHA, ANSI, and ASME regulations and standards that pertain to overhead crane operations and the safety of crane operators. Upon completion of Overhead training, the student will be familiar with, overhead crane hazards, methods of keeping loads stable while in motion and during handling, what to do in case of failed equipment inspection, hands-on practical demonstration of overhead crane operations, and the component of overhead cranes and their functions.

Back & Safe Lifting

This course prepares workers to prevent back injuries on the job and covers common causes of back injuries, general safety guidelines, and proper lifting techniques.

Machine Guarding

In a recent report released by the Bureau of Labor Statistics more than 150 workplace deaths occurred over a one year period when employees were caught in operating equipment or machinery. There were more than 80,000 machine-related lost time injuries the same year. Unguarded or inadequately guarded machinery area a leading cause of these injuries. During our training we will discuss the hazards of working around machinery, what types of mechanical motion require safeguards and various methods of protection that may prevent injury or death.

Welding, Cutting and Brazing 29 CFR 1910.251-255

This course introduces the student to the hazards and safety precautions related to welding, cutting, brazing, and soldering. The course discusses general welding operations, applicable OSHA standards, and suggestions for protecting welders and coworkers from exposures to the many hazards inherent in those operations. Our specialist will walk you through OSHA regulations pertaining to hot work. Through discussion and activities, you’ll learn practices and procedures that will keep you in compliance and, best of all, protect your employees.

Electrical Safety 29 CFR 1910.331-335

The foremost goal of this two-day Arc Flash Electrical Safety course is to keep workers safe while working on or around electrically energized equipment. The course is structured to help companies fulfill requirements set forth in OSHA 29 CFR Part 1910, Subpart S Electrical and NFPA 70E “Standard for Electrical Safety in the Workplace,” which requires this type of specialist-led training for anyone working with electrically energized equipment. Overall, this program is designed to reduce liability for the employer while establishing a culture of safe work practices among employees; it is a key component of any electrical training program.

Arc Flash Safety (8-hours)

This course ensures that you are trained and prepared to handle and work with electricity - and that you know how to prevent arc flashes. This course is I-CAB recognized and satisfies the classroom requirement of OSHA compliance regulations. It breaks down and summarizes SHA 29 Code of Federal Regulations Part 1910 Subpart S and IEEE Standard 158. Specifically, this course goes over electrical safety requirements, design standards, work practices, and maintenance requirements. You’ll learn about general electric safety practices and electricity-related regulations, including wiring, power systems, and safety standards.

OSHA 10-hour Certification

This OSHA 10-hour training helps prepare employees to identify, control, and prevent injury from common occupational hazards in general industry facilities. You’ll learn OSHA’s best practices for reducing accidents and injuries, including fall protection, emergency evacuation plans, and the use of personal protective equipment. You’ll also learn about the major hazards you might encounter in general industry work and solutions for recognizing, controlling, and protecting against them. This includes flammable and combustible substances, chemical and electrical hazards, and fire prevention.

OSHA 30-hour Certification

This OSHA 30-hour course is the guide for any safety manager or supervisor to creating a culture of safety in your workplace. You’ll get a comprehensive look at the policies, procedures, and standards covered by OSHA 29 CFR 1910. You’ll learn about the basic framework of a workplace safety and health program and how to manage both. This includes understanding an employer’s responsibilities for worker safety, as well as worker’s rights to learn about the potential hazards of their job. The course also covers all the hazards you might encounter in many different industries, from scaffolding to bloodborne pathogens. You’ll learn about essential safety procedures like lockout/tagout protocols, machine guarding mechanisms and industrial hygiene.

Welding/Hot Work 29 CFR 1910.251-255

This course is designed to make you aware of the OSHA General Industry standard Subpart Q for Hot Work. More specifically 29 CFR 1910.251-255 titled Welding, Cutting, and Brazing. This course will show you how to comply with the OSHA regulation and keep you and your co-workers safer at work. This is an awareness program that introduces Hot Work safety information. It is assumed that you already obtain the necessary skills to perform Hot Work operations. As an employee, you will learn how to recognize related hot work hazards and how to avoid injuring yourself and others. As an employer, you will learn OSHA requires you to provide a safe workplace.

Lead-Employee Information and Training 29 CFR 1910.1025

This course provides OSHA-required training to develop employees’ general awareness of lead, the risks, and the regulatory requirements for protecting themselves and co-workers who work with lead. The course content is applicable to general industry and shipyard workplaces. OSHA requires annual lead awareness training for employees who encounter or may be exposed to lead on the job.

Hazard Communication/GHS 29 CFR 1910.1200

This Hazcom online course is designed to meet the general information and training components as specified in OSHA’s Hazard Communication Standard at 29 CFR 1910.1200(h). The training content in this course reflects the GHS chemical labeling system and the new 16-section Safety Data Sheets adopted by OSHA in 2012. Employees who complete this course can recognize and use hazard labels and Safety Data Sheets to protect themselves and their co-workers from chemical hazards on the job.

Process Safety Management 29 CFR 1910.119

This course provides a basic understanding of OSHA standards for process safety management (PSM) of Highly Hazardous Chemicals (HHC). You’ll learn about the proactive planning needed to mitigate or prevent chemical releases from the failure of safety processes, procedures, or equipment. It will include learnings about the identification and evaluation of potential problems, as well as the importance of training, emergency planning, and mechanical integrity. The course covers the role of the employers and employees, as well as the requirements for contractors.

Fall Protection

This OSHA compliant course provides you with the information you need to protect yourself and your fellow workers from the safety hazards that lead to falls. You’ll learn fall protection standards and definitions, including the differences between prevention, restraint, and arrest. The course also reviews common hazards and rescue responses, so you understand what will happen and the proper actions to take if you were to fall on a construction site.

Ladders 29 CFR 1910.25-27

This online course provides employees with a basic knowledge of safe work practices and OSHA requirements for ladder use, inspection and maintenance.

Working at Heights

This designed Work at Height training course provides participants with knowledge in understanding the National & International regulations related to working at height as well as provides necessary information needed to be able to successfully mitigate working at height risks and implement control measures. It affirms an understanding of carrying out working at height risk assessment, safe use access equipment and monitoring to ensure that employees can reduce their risk of falls from height, adopting preventive and protective measures, rescue procedures in cases of emergency.

Ergonomics

This course presents an overview of ergonomics best practices for office workers. It will cover the basic concepts of ergonomics, as well as ways to work smarter and more safely to reduce the possibility of injury from musculoskeletal disorders. It also includes the causes of the most common injuries and discuss solutions based on the science of ergonomics to make your office safer.

Heat Stress Prevention

This course provides initial or refresher training for employees who are at risk for heat stress, heat stroke, exhaustion, cramps, heat rash, and other injuries and illnesses associated with working in heat or humidity.

Walking & Working Surfaces 29 CFR 1910 (d)&(i)

This training will review some common causes for slips, trips and falls that occur in the workplace. It will also review OSHA regulations and how to keep workers safe from these preventable accidents.

Forklift Certification / Powered Industrial Trucks 29 CFR 1910.178

This course provides learnings around the general requirements for safe operation of Class 4, 5, & 7 Powered Industrial Trucks (forklifts) and the requirements of the OSHA 1910.178 Standard. The training covers laws and regulations, safe operating practices, hazards, vehicle types, controls, inspections and maintenance, capabilities, stability, fueling, and workplace specific requirements.

Portable Fire Extinguishers 29 CFR 1910.157

This course is designed to satisfy OSHA’s fire protection standard at 29 CFR 1910.157 for employees designated by their employer to use portable fire extinguishers in the workplace. Employees learn to select the right fire extinguisher for the job, and use it correctly. The course provides employees an overview of portable fire extinguisher standards, as well as instruction in the general principles of fire extinguisher use and the hazards associated with incipient stage fire fighting.

General Safety

This training covers OSHA’s general safety and health provisions. It outlines the importance of safety training and education, then move on to general accident prevention. You’ll learn about first aid practices, fire protection and prevention, and the required emergency action plans that your employer must have in place.

Emergency Action Plan

This course is designed to provide guidance to employers that need to set up an emergency response plan and wish to have guidelines for creating a plan or to audit their existing plan. Also, this training will improve employees’ knowledge and heighten their awareness of the basic information and preplanning needs they must be accountable for within their specific work areas to be properly prepared for an emergency.

Hand and Portable Powered Tools 29 CFR 1910 Subpart P

This course covers OSHA Hand and Power Tool Safety standards, focusing on General Industry 29 CFR 1910 Subpart P. Employees should be trained in the proper use of all tools and be able to recognize the hazards associated with different types of tools and required safety precautions.

Hazardous Waste Operations 29 CFR 1910.120

Hazardous Waste Operations and Emergency Response (HAZWOPER) training requirements were set in 1990 by OSHA in consultation with the U.S. Environmental Protection Agency (EPA), the U.S. Coast Guard (USCG) and the National Institute for Occupational Safety and Health (NIOSH).

HAZWOPER 8-hour

This refresher course covers an overview of HAZWOPER regulations, detecting hazardous materials, toxicology, respirators, site safety planning, decontamination, hazardous communication, hazardous waste, and levels of protection. This course is intended for all general site workers who remove hazardous waste or who are exposed or potentially exposed to hazardous substances or health hazards. OSHA requires that employees, managers and supervisors successfully complete an 8-hour HAZWOPER refresher course to maintain the required level of HAZWOPER knowledge. When supplemented with site-specific information, this course meets the OSHA requirements in 29 CFR 1910.120 for 8 hours of annual refresher training for workers conducting clean-up operations at hazardous waste sites.

Note: This 8 hour refresher course is intended ONLY for those who have already completed the 24-hour or 40-hour HAZWOPER training.

HAZWOPER 24-hour

This course provides 24 hours of Hazardous Waste Operations and Emergency Response training required by OSHA standard 29 CFR 1910.120. It is designed for workers at uncontrolled hazardous waste operations who need 24 hours of HAZWOPER training. Workers will learn how to recognize and avoid common risks related to hazardous materials. It also outlines learnings about personal protective equipment (PPE), hazard communication, decontamination, site emergencies and general workplace safety topics like fall protection.

HAZWOPER 40-hour

This course provides 40 hours of Hazardous Waste Operations and Emergency Response training required by OSHA standard 29 CFR 1910.120, which requires workers to complete HAZWOPER training before starting work at an uncontrolled hazardous waster operation. HAZWOPER training prepares cleanup and emergency response workers to operate safely during a variety of scenarios involving hazardous substances. It also includes policies, practices and procedures that reduce the risk of injury and illness related to harmful exposures on the worksite.